This is the free public lab: building here costs you nothing -- each build's AI is paid from a community pot that Genworks keeps filled, and an author key has a monthly AI allowance of its own. Everything made here -- your prompts, the model and its code -- is public the moment it is made, in the archive for anyone to read and reuse under the GNU Affero General Public License, version 3 or later -- the license of Gendl, which it runs on. Nothing is sold here; a private lab of your own, where you can sell what you make, is a rung up the ladder.
Build from a drawing: a PDF of up to 10 pages, an image or a text file (DXF, SVG, CSV, STEP), 2.0 MB at most.
You asked: A single-row deep-groove ball bearing, size 6206, carrying a shaft in a housing. Parts: inner ring, outer ring, the balls, a cage shown as small links between neighbouring balls, a stub of shaft through the bore and a housing block around the outer ring, drawn so the balls stay visible between the rings. Inputs: bore 30 mm, outside diameter 62 mm, width 16 mm, number of balls 9, ball diameter 9.525 mm, basic dynamic load rating 19500 N, basic static load rating 11200 N, radial load 3000 N, axial load 500 N, shaft speed 3000 rpm, and the STATE input shaft-angle-deg. The inner ring and shaft turn with the shaft angle (put a mark on the shaft so it shows); the balls and cage orbit at the cage ratio, 0.5 (1 - ball diameter / pitch diameter) of the shaft angle, as they do with the outer ring fixed. Compute: pitch diameter, cage speed in rpm, ball spin speed in rpm, ball-pass frequency on the outer and on the inner ring in Hz, equivalent dynamic load P (P = Fr when Fa/Fr is at most 0.27, otherwise 0.56 Fr + 1.6 Fa), basic rating life L10 = (C/P)^3 in millions of revolutions and in hours at the shaft speed, the static safety factor C0 / Fr, and the speed factor n x dm in mm/min. (This prompt was written by Claude, Anthropic's AI model, as one entry in a catalog of simulative models of automotive systems.) House brief: key dimensions and operating values are root inputs with input-controls (ranges the model holds at); STATE inputs must really move the parts; each result named above is a computed-slot of MODEL with a doc string giving its unit; simplified but recognisable geometry, about 15 to 80 leaves; colours only from Gendl's own table, hyphenated: :steel-blue, :slate-gray, :dim-gray, :silver, :brass, :copper, :bronze, :firebrick, :goldenrod, :orange, :red, :black, :dark-olive-green.
A question or a problem: [email protected]; a fault in the lab's code, its issue tracker.